From c7eb5bfddce3f50de7c72ad1d98c2fc7d3a7a14d Mon Sep 17 00:00:00 2001 From: Refik Hadzialic Date: Mon, 9 Apr 2012 18:52:07 +0200 Subject: das --- vorlagen/thesis/src/kapitel_x.tex | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) (limited to 'vorlagen/thesis/src/kapitel_x.tex') diff --git a/vorlagen/thesis/src/kapitel_x.tex b/vorlagen/thesis/src/kapitel_x.tex index 1727864..3d05e00 100644 --- a/vorlagen/thesis/src/kapitel_x.tex +++ b/vorlagen/thesis/src/kapitel_x.tex @@ -176,9 +176,22 @@ which are serial communication interfaces. \section{Cable configuration} \label{sec:hardwareConfig} -In the next section, the author will focus on connecting the hardware properly. -At least 4 network ethernet cables were required and one switch or hub connected -to the internet. +In the next section, the author will focus on properly connecting the hardware. +At least 4 ethernet cables with RJ45 connectors, on both sides, were required +and one switch or hub connected to the internet. One should +take notice of the cabling between the nanoBTS and the ethernet switch or hub, +since wrong cabling with the power supply unit (PSU) could damage one of +the devices. In Figure \ref{img:connectionDiagram}, the junction points are +label according to the used configuration setting. The ethernet cables +between the switch/hub, PSU and nanoBTS should not be longer +than 100 m \citep{installnanoBTS}. + +\begin{figure}[ht!] + \centering + \includegraphics[scale=0.5]{img/hardwareConnection} + \caption[]{Cable connections, showing interconnection diagram} +\label{img:connectionDiagram} +\end{figure} \chapter{Implementation} -- cgit v1.2.3-55-g7522